Event Id 1311 Server 2008 R2
If only one intersite transport, IP or SMTP, has site link objects, that is the transport that is in use. All Rights Reserved. Verify To verify that connections to the RD Session Host server are working properly, establish a remote session with the RD Session Host server. Add an ntdsConnection object to a Domain Controller> that contains the Partition DC=WPADMIN,DC=NCHEO,DC=com in> this site from a Domain Controller that contains the same> Partition in another site.> AnonymousJan 13, 2005, this contact form
In our case, replication wasn''t occurring as a result of the lingering object and after removing the lingering object (see T736571 for syntax) the replication problems were gone. I had this issue and found that my domain controllers were out of sync. If the ping was successful, you will receive a reply similar to the following:Reply from IP_address: bytes=32 time=3ms TTL=59Reply from IP_address: bytes=32 time=20ms TTL=59Reply from IP_address: bytes=32 time=3ms TTL=59Reply from IP_address: Go to Solution 5 3 2 +2 5 Participants CCtech(5 comments) LVL 1 Steve(3 comments) LVL 27 Windows Server 20128 Philip Elder(2 comments) LVL 38 Windows Server 201215 DrDave242 LVL 26 click for more info
Event Id 1311 Server 2008 R2
To open TS Licensing Manager, click Start, point to Administrative Tools, point to Terminal Services, and then click TS Licensing Manager.If the User Account Control dialog box appears, confirm that the Note: You can also specify a Terminal Services license server for the terminal server to use by using Group Policy. Join our community for more solutions or to ask questions. If can ping the localhost address but not the local address, there may be an issue with the routing table or with the network adapter driver.Type ping DNS_server, where DNS_server is
To perform this procedure, you must have membership in the local Administrators group, or you must have been delegated the appropriate authority. Click OK. Configure the Remote Desktop Session Host server to use the certificate for TLS 1.0 (SSL).If the Terminal Server certificate or template-based certificate will expire soon or is expired, take the following Event Id 1925 Configure the discovery scope for the Terminal Services license server To resolve this issue, use Review Configuration in TS Licensing Manager to identify and, if possible, correct any issues that prevent
If you are experiencing a similar issue, please ask a related question Suggested Solutions Title # Comments Views Activity Cannot install / add SQL database when installing MyCalls software 22 80 This documentation is archived and is not being maintained. I do not want this remote DC talking to a DC in another Domain even though it is in the same Forest. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.
An example of English, please! Confirm that all license servers on the network are registered in WINS/DNS, accepting network requests, and the TS Licensing Service is running.Event InformationAccording to Microsoft :Diagnose :This error might be caused More resources Tom's Hardware Around the World Tom's Hardware Around the World Denmark Norway Finland Russia France Turkey Germany UK Italy USA Subscribe to Tom's Hardware Search the site Ok About Connect with top rated Experts 11 Experts available now in Live!
Event Id 1865
If neither of the tasks correct this condition, see previous events logged by the KCC that identify the inaccessible directory servers. https://www.experts-exchange.com/questions/28925260/2012-RDS-Remote-Desktop-Licensing-Service-issues.html For additional informationabout resolving Event ID 1865, see article944351 in the Microsoft Knowledge Base (http://go.microsoft.com/fwlink/?LinkId=109266). Event Id 1311 Server 2008 R2 To determine if there is a network connectivity problem between the terminal server and the license server: On the terminal server, click Start, click Run, type cmd, and then click OK. Event Id 1566 Look in the System Log in Event Viewer on the affected domain controller if you have reason to believe that there is a network connectivity issue with the domain controller.
PHX will create a connection with KC, that is what happens if Bridge all site links is enabled. (if your network if fully routed) It is generally recommended to keep it See example of private comment Links: ME214745, ME224815, ME244368, ME271997, ME307593, ME819249, ME893066, ME913446, EventID 1311 from source Active Directory, EventID 1312 from source NTDS KCC, Fixing replication topology problems, Upgrading The certificate must have an Enhanced Key Usage of Server Authentication (220.127.116.11.18.104.22.168.1) or no Enhanced Key Usage at all. navigate here Basically a hub and spoke model for topology.
To open Terminal Services Configuration, click Start, point to Administrative Tools, point to Terminal Services, and then click Terminal Services Configuration. Due to Experts Exchange claiming this ticket "Abandon" after only a few days, I am marking as resolution, as I believe it will fix the issue. If the problem persists, please contact your domain administrator. ADDITIONAL INFO If this computer is a domain controller for the specified domain, it sets up the secure session to
Note: This situation also can occur if there are domain controllers in the directory that no longer exist.
If the domain controller is running, check the network settings on the domain controller. If there are no error events that are related to the KCC, it is functioning properly. This option is preferred. To specify a license server to use: On the terminal server, open Terminal Services Configuration.
You’ll be auto redirected in 1 second. x 8 EventID.Net From a newsgroup post: "In certain rare conditions, the error will appear erroneously. Verify Perform the following procedure on the domain controller on which you want to verify that the Knowledge Consistency Checker (KCC) is functioning. his comment is here All Rights Reserved Tom's Hardware Guide ™ Ad choices HomeChange ViewPrint KCC Encountered an Error While Adding a Connection Object Ultrasound has detected that the KCC has encountered an error
In the console tree, ensure that Sites is expanded. See the link to "EventID 1311 from source Active Directory" for additional information on this event. This is probably due to inaccessible directory servers. User Action Perform one of the following actions: - Publish sufficient site connectivity information so that the KCC Also, licensing manager show 50 per user CALS available and none in use.
Check network cabling. To determine if the Terminal Services Licensing service is started: Open the Services snap-in on the license server. Event Details Product: Windows Operating System ID: 1131 Source: Microsoft-Windows-TerminalServices-RemoteConnectionManager Version: 6.0 Symbolic Name: EVENT_NO_LICENSE_SERVER_DOMAIN Message: The terminal server could not locate a license server in the %1 domain. Error 0x8007054b" and Event ID 1131 "The Remote Desktop Session Host server could not contact the Remote Desktop license server licenseservername.domain.local.
The ISTG role was not hold by the bridge-head server. Custom search for *****: Google - Bing - Microsoft - Yahoo Feedback: Send comments or solutions - Notify me when updated Printer friendly Subscribe Subscribe to EventID.Net now!Already a subscriber? If there are issues found and not resolved, it eventually leads the components to fail or stop working and fi… Active Directory Assigning Local Administrator Priviledges using Group Policy Article by: Note: The following procedures include steps for using the ping command to perform troubleshooting.
Otherwise, this computer sets up the secure session to any domain controller in the specified domain. Event Xml:
After assigning it to the bridge-head server, the problem was gone. You might want to prevent new user sessions from being created on the RD Session Host server when you are planning to take the RD Session Host server offline for maintenance or to install new applications. Check Event Viewer to see if there are any failure messages that are related to the KCC. To ensure that the domain controllers that host the identified directory partition are accessible: Open a command prompt as an administrator.
Note that the Group Policy setting will take precedence over the setting configured in Terminal Services Configuration.